We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Putting Basketball Hoop In-Ground: A Step-by-Step Guide for Beginners

Learn how putting a basketball hoop in-ground works, from site choice and hole sizing to concrete curing and final leveling, so your hoop stays solid for years.

Updated November 2026

Putting a basketball hoop in-ground means setting a steel pole into a concrete footing that is dug into firm, level soil. Done right, the system stays rigid under dunks and wind, and it can be removed later if you move. This guide covers site selection, digging, setting the pole, and curing so you can plan the job with confidence.

Step 1: Pick the Right Spot and Check for Utilities

Choose a location with at least 10 feet of clear space behind the baseline and room for the player to drive to the basket. Before digging, call 811 in the US so utility lines can be marked for free. Most installers also suggest keeping the pole at least 3 feet from the edge of a driveway or walkway to avoid cracking the slab later.

Shopping for one? See our guide: 6 Best Spalding Basketball Hoop In-Ground Options Compared (2026).

Step 2: Dig and Size the Footing Hole

Most in-ground systems call for a hole about 24 inches in diameter and 36 to 42 inches deep, though you should confirm the exact dimensions in your manufacturer’s manual. A sonotube or cardboard form keeps the concrete round. Add 4 to 6 inches of gravel at the bottom for drainage, then set a rebar cage or anchor sleeve so the pole sits centered.

Step 3: Set the Pole and Pour the Concrete

Insert the pole into the sleeve or anchor, then check it with a level in two directions. Brace it with stakes so it cannot shift while the concrete is poured. Use a ready-mix concrete rated at 3,000 to 4,000 psi, pour it in layers, and tamp it to remove air pockets. Confirm the pole is plumb one more time before the mix starts to set.

Step 4: Cure the Concrete and Finish the Installation

Concrete generally needs about 7 days to reach most of its strength, and manufacturers often advise waiting several days before hanging the backboard. Keep the footing moist during the first few days if the weather is hot. Once cured, attach the backboard and rim, tighten all bolts to the torque listed in the manual, and fill any gap around the pole with a flexible sealant.

Common Mistakes to Avoid

  • Skipping the utility check, which can lead to costly repairs.
  • Pouring concrete before confirming the pole is plumb.
  • Hanging the backboard before the concrete has cured.
  • Using dirt instead of gravel at the base, which traps water and encourages shifting.
  • Ignoring local permit rules, since some towns require one for permanent structures.
  • Post hole digger: A manual auger makes a clean, round hole much faster than a shovel. View on Amazon
  • Four-foot level: A long level helps you confirm the pole is plumb before the concrete sets. View on Amazon
  • Concrete mixing tub: A dedicated mixing tub keeps batches consistent for the footing. View on Amazon

FAQ

How deep should a basketball hoop footing be?

Most in-ground systems call for a hole about 36 to 42 inches deep, but you should follow the depth listed in your manufacturer’s manual. Frost depth in colder regions may require a deeper footing.

How long does concrete need before I can play?

Concrete usually needs about 7 days to reach most of its working strength. Many manufacturers suggest waiting at least several days before hanging the backboard and rim.

Do I need a permit to install an in-ground hoop?

Requirements vary by city and county, so check with your local building department before digging. If you are unsure about structural or utility issues, consult a licensed professional.

Conclusion

Putting a basketball hoop in-ground is manageable with careful planning, the right hole size, and patient curing. Check utilities first, keep the pole plumb, and give the concrete time to set. Taking these steps gives you a stable hoop that holds up to years of play.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our basketball gear guides, checking product details against manufacturer specifications and owner feedback.

About the author

Audrey Hayes
Audrey Hayes

Audrey Hayes writes reviews and buying guides for Hoops Junkie.