We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

How to Put Basketball Hoop in Ground: A Step-by-Step Guide for Beginners

Learn how to put basketball hoop in ground, from digging the hole and setting the pole to pouring concrete and leveling the backboard. Follow these steps.

Updated November 2026

Learning how to put basketball hoop in ground means digging a deep, straight hole, setting a steel pole in concrete, and leveling the system so it stays solid for years. Done right, an in-ground hoop handles hard play without wobbling or shifting. This guide walks through the process, the tools you need, and the mistakes that cause problems later.

Plan the Location and Check for Utilities

Before you dig, confirm the spot is safe. Call 811 (in the US) to have underground utility lines marked, since it is free and required in most states. Choose a flat area with at least 3 to 4 feet of clearance behind the backboard and enough room for players to move. Check that the pole will sit at least 2 to 3 feet from the edge of the driveway so the base is not undermined over time.

Shopping for one? See our guide: 6 Best Spalding Basketball Hoop In-Ground Options Compared (2026).

Dig the Hole and Set the Pole

Most in-ground systems call for a hole roughly 24 to 36 inches deep and 12 to 18 inches wide, though you should follow the depth in your manufacturer’s manual. Dig the hole, add 4 to 6 inches of gravel for drainage, and lower the pole in so it stands plumb. Check it with a level on two sides before you pour anything.

  1. Dig the hole to the depth specified in the manual.
  2. Add a gravel base and tamp it firmly.
  3. Set the pole, bracing it so it stays vertical.
  4. Check plumb from two directions with a level.
  5. Pour concrete around the base and let it cure for at least 48 to 72 hours before loading the pole.

Mount the Backboard and Level the Rim

Once the concrete has cured, attach the backboard and goal according to the assembly steps. Use a level on the backboard and measure the rim height at both ends with a tape measure. The rim should sit exactly 10 feet from the floor. A small variance is noticeable on a shot, so take your time here.

Tighten and Recheck Hardware

After a few weeks of play, bolts can loosen. Recheck all fasteners and tighten them to the torque range listed in the manual. Look for cracks around the base and along the pole.

Common Mistakes to Avoid

  • Skipping the utility check, which can cause dangerous and costly damage.
  • Setting the pole before the hole is deep enough for the required depth.
  • Pouring concrete before confirming the pole is plumb.
  • Loading the pole or hanging weight on the hoop before the concrete has cured.
  • Placing the hoop too close to a garage, fence or power line.

A post-hole digger or auger makes the hole much easier to dig and keeps the sides clean. View on Amazon

A torpedo level helps you confirm the pole is plumb on both axes before the concrete sets. View on Amazon

Fast-setting concrete mix is designed for post installation and saves time compared with mixing from bulk materials. View on Amazon

For a deeper look at the pole itself, see In Ground Basketball Hoop Pole: How to Choose, Set and Anchor One (7 Steps). If you would rather have a professional handle the work, In Ground Basketball Hoop Installers: How to Choose and Hire (2026) covers what to look for.

FAQ

How deep should the hole be for an in-ground basketball hoop?

Most manufacturers specify a depth between 24 and 36 inches, but the exact number depends on the model and pole size. Always follow the depth listed in your owner’s manual.

How long does concrete need to cure before I can use the hoop?

Plan on at least 48 to 72 hours for the concrete to set before loading the pole. Full strength takes longer, so avoid hanging weight or heavy play on the system until then.

Do I need to call 811 before digging?

Yes. In the US, calling 811 lets local utility companies mark buried lines at no cost. Digging without this check can cause serious injury and expensive repairs.

Conclusion

Installing an in-ground hoop comes down to a few key steps: check for utilities, dig to the correct depth, set the pole plumb, and let the concrete cure fully. Take your time with the level and the cure time, because those two steps decide how well the hoop holds up. A careful setup will keep it steady for seasons of play.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our basketball gear guides, checking product details against manufacturer specifications and owner feedback.

About the author

Audrey Hayes
Audrey Hayes

Audrey Hayes writes reviews and buying guides for Hoops Junkie.