In Ground Basketball Hoop Dunhams: How to Choose and Set One Up (Step-by-Step)
Learn how to pick an in ground basketball hoop from Dunhams, what to check before buying, and the setup steps that keep it stable for years.
Updated November 2026
An in ground basketball hoop from Dunhams can give you a stable, permanent shooting setup, but only if you choose the right model and anchor it properly. This guide walks through the key buying checks and the installation steps so you know what to expect before you order. Check Dunhams’ official site for current models, sizes and availability.
Step 1: Choose the Right Size and Backboard
Start by measuring the space you have. An in-ground post needs a clear radius of roughly 10 feet in front of the backboard so players can drive to the basket without hitting anything. Most in-ground systems use a 54-inch acrylic or polycarbonate backboard, which is the standard size for regulation-style play at home.
Shopping for one? See our guide: 6 Best Spalding Basketball Hoop In-Ground Options Compared (2026).
Look at the post diameter and wall thickness as well. Heavier-gauge posts resist wobble better, especially if you plan to dunk. Check the manufacturer’s stated maximum height range and confirm it matches the height you want.
Step 2: Plan the Concrete Footing
The footing does most of the work in keeping the hoop steady. Dig the hole to the depth listed in the product manual, which is typically in the range of 3 to 4 feet for a standard post. Make sure the hole is wide enough for the footing spec, and keep the post plumb while the concrete sets.
Allow the concrete to cure for the full time recommended on the bag, which is often several days before you hang the backboard or let anyone play. Rushing this step is the most common cause of a leaning post later.
Step 3: Install and Test the Hoop
- Lay out the base plate and check that the post sits level in all directions.
- Set the post into the footing and brace it while the concrete hardens.
- Attach the backboard, rim and net according to the manual, tightening all bolts evenly.
- Adjust the height using the crank or pin system, if your model includes one.
- Give the system a firm shake by hand and a few test shots before anyone dunks.
Tools and Materials Checklist
- Post hole digger or auger
- Level and tape measure
- Concrete mix, enough for the footing depth in the manual
- Socket set and wrenches
- Bracing lumber to hold the post plumb
- Helper for lifting the backboard assembly
Common Mistakes to Avoid
- Setting the post before checking that the location has the correct clearance for play.
- Skipping the full concrete cure time before adding the backboard.
- Tightening one bolt fully before the others, which can warp the frame.
- Installing the hoop too close to a fence, garage or power lines.
- Ignoring buried utility lines. Call your local utility locating service before digging.
Recommended Gear
A sturdy level makes it much easier to keep the post plumb during the pour. View on Amazon
A post hole auger speeds up digging and gives you a cleaner, more uniform hole. View on Amazon
A quality socket set helps you tighten the many bolts evenly without stripping them. View on Amazon
If you are still comparing options, you may find Used in Ground Basketball Hoop: 7 Checks Before You Buy (2026) useful, and Putting Basketball Hoop In-Ground: A Step-by-Step Guide for Beginners covers the general installation process in more detail.
FAQ
How deep should the footing be for an in ground basketball hoop?
Follow the depth listed in your Dunhams manual, which is typically around 3 to 4 feet for a standard post. Deeper footings resist leaning better, especially in soft soil.
How long should concrete cure before I play?
Check the concrete bag for the recommended cure time, which often runs several days. Wait the full period before hanging the backboard or allowing dunks.
Can one person install an in ground hoop?
Digging and mixing concrete can be done solo, but lifting the backboard assembly is much safer with a helper. For any doubts about soil, utilities or structural load, consult a professional installer.
Conclusion
Choosing the right in ground basketball hoop from Dunhams comes down to measuring your space, confirming the post and backboard specs, and planning a proper footing. Take your time with the concrete and the assembly, and the hoop should stay solid for years. Always verify current product details on the official site before buying.
Related reading
- Used In-Ground Basketball Hoop for Sale: 5 Best Options Compared (2026)
- Top 5 Glass In-Ground Basketball Hoops for Driveways and Backyards
- Spalding In-ground Basketball Hoop Instructions: Step-by-Step Setup Guide
Ready to choose one?
