7 Best Ball Jar Soap Dispenser Pump Options for Every Need (2026)
Compare the best ball jar soap dispenser pump options for mason jars, with key specs, pros, cons and a buying guide to help you pick the right one.
By hoopsjunkie editorial team
Updated November 6, 2026
As an Amazon Associate I earn from qualifying purchases. This page may contain affiliate links.
A ball jar soap dispenser pump turns a standard mason-style jar into a tidy, refillable soap or lotion dispenser for the kitchen sink, bathroom vanity or utility room. The appeal is simple: you keep the vintage look, avoid buying single-use plastic bottles, and get a pump that actually fits the jar’s neck. The hard part is that “fits a Ball jar” covers several neck sizes and thread styles, and pumps vary a lot in flow rate, tube length and build quality. This guide focuses on the criteria that matter most: thread compatibility, pump material, dispensing volume per press, ease of priming and cleaning, and how well the pump holds up to thick soaps and lotions. Each pick below is a real, widely sold pump type, and the specs listed are the ones manufacturers commonly publish. Use the comparison table to narrow things down, then check the individual entries and the buying guide before you order.
Our Top Picks
Quick Comparison
| Product | Best for | Key feature |
|---|---|---|
| Ball Regular Mouth Soap Dispenser Pump Lid | Standard Ball regular-mouth jars | Fits the common 70 mm regular-mouth lid |
| Ball Wide Mouth Soap Dispenser Pump Lid | Wide-mouth jars and easy refilling | Larger opening for thick lotions |
| Mason Craft and More Stainless Steel Soap Pump | Users wanting a metal finish | Stainless steel pump head |
| Ball Mason Jar Lid with Pump Dispenser Set | Buyers who want a complete starter kit | Lid and pump sold together |
| Mason Jar Soap Dispenser Pump Set with Brass Finish | Decor-focused bathroom setups | Brass-tone collar and head |
| Glass Mason Jar Soap Pump Rustproof Stainless | Kitchen sinks and wet areas | Rust-resistant wetted parts |
| Mason Jar Lotion Pump Dispenser Set | Thicker lotions and creams | Wide-bore dip tube for viscous contents |
Ball Regular Mouth Soap Dispenser Pump Lid
This is the most straightforward choice for anyone with standard regular-mouth Ball jars, typically the pint and half-gallon sizes with a 70 mm opening. It suits people who want a clean, familiar lid-and-pump combination without adapters.
Key specs
- Designed for regular-mouth Ball jars (about 70 mm neck)
- Plastic pump head and dip tube
- Dispenses a measured amount per press
- Compatible with liquid soap and lightweight lotion
Pros
- Matches the most common Ball jar neck size
- Simple one-piece install with no tools
- Easy to find replacement parts for
Cons
- Thick creams can slow the pump or clog the dip tube
- Only fits regular-mouth jars, so check your jar first
Ball Wide Mouth Soap Dispenser Pump Lid
Owners with wide-mouth jars, or those who plan to refill with thicker products like hand cream, will find this option easier to work with. The larger opening makes it simpler to drop in a dip tube and to clean the jar afterward.
Key specs
- Designed for wide-mouth Ball jars (about 86 mm neck)
- Plastic pump head with standard dip tube
- Fixed dispensing volume per press, varying by model
- Suitable for soap, lotion and hand sanitizer
Pros
- Wider neck simplifies refilling and cleaning
- Handles slightly thicker contents than regular-mouth designs
- Pairs well with wide-mouth decor jars
Cons
- Not interchangeable with regular-mouth jars
- Larger lid can look bulky on narrow shelves
Mason Craft and More Stainless Steel Soap Pump
Buyers who want a metal finish that looks at home beside stainless fixtures often gravitate toward this type of pump. It is a good match for kitchen sinks where a polished look matters.
Key specs
- Stainless steel pump head and collar
- Fits standard mason-style jar threads (check your neck size)
- Stainless construction resists corrosion in wet areas
- Dip tube length typically sized for a quart or pint jar
Pros
- Durable metal look that suits modern kitchens
- Handles frequent use and wet conditions well
- Looks more substantial than plastic alternatives
Cons
- Heavier, so it adds weight to a light jar
- Metal parts can show water spots if not wiped dry
Ball Mason Jar Lid with Pump Dispenser Set
This is a practical choice for first-time buyers who want everything in one package rather than sourcing a lid and pump separately. It works well as a gift or a quick bathroom refresh.
Key specs
- Lid and pump sold as a matched set
- Standard mason-jar thread compatibility
- Plastic pump with dip tube included
- Suitable for liquid soap and light lotion
Pros
- No guesswork about lid and pump compatibility
- Ready to use out of the box
- Good starter option for multiple jars
Cons
- Bundled parts may not match a jar you already own
- Plastic components show wear faster than metal
Mason Jar Soap Dispenser Pump Set with Brass Finish
Decor-focused users who want a warm, antique look in a powder room or guest bath will find this style appealing. The brass-tone finish pairs well with vintage jars and farmhouse fixtures.
Key specs
- Brass-finish collar and pump head
- Mason-jar thread fit (confirm regular or wide mouth)
- Metal collar with plastic internal components
- Dispensing volume varies by manufacturer
Pros
- Strong decorative appeal for bathroom displays
- Metal collar feels sturdier than all-plastic lids
- Coordinates well with antique-style décor
Cons
- Finish can dull or tarnish with heavy moisture exposure
- Less suited to heavy daily kitchen use
Glass Mason Jar Soap Pump Rustproof Stainless
Those mounting a jar pump over a sink, or in a shower or utility area with constant moisture, benefit from rust-resistant wetted parts. This type of pump is built to tolerate water exposure over time.
Key specs
- Rustproof stainless-steel wetted components
- Designed for mason-style glass jars
- Dip tube sized for jars around one quart
- Pump action rated for repeated daily use (per manufacturer)
Pros
- Resists rust in humid or wet environments
- Good for high-frequency use
- Stable, weighted feel on the jar
Cons
- Stainless parts cost more in material than plastic, so the pump is heavier
- Some owners report needing to prime the pump after long idle periods
Mason Jar Lotion Pump Dispenser Set
Users who regularly dispense thicker products like body lotion or hand cream should look for a pump with a wider dip tube and a more robust spring. This set is aimed at that use case.
Key specs
- Wide-bore dip tube for viscous contents
- Mason-jar thread compatibility (check neck size)
- Lotion-rated pump mechanism per manufacturer
- Plastic head and collar
Pros
- Better flow with thick lotions than standard soap pumps
- Reduces the chance of air locks with creamy contents
- Suits shared bathrooms with heavy use
Cons
- Wide-bore tubes can leave residue that needs regular rinsing
- Not always the best choice for thin liquid soap
Buying Guide
Selection criteria
Start with your jar. Measure the inside diameter of the neck at its widest point, then check whether it is a regular-mouth (about 70 mm) or wide-mouth (about 86 mm) opening. Most sellers list the fit type in the title or specifications. Next, decide what you will dispense. Thin liquid soap, foaming soap, and thick lotion all behave differently in a pump, and the right dip tube and spring depend on viscosity.
Important features
- Thread and neck fit. A mismatch here is the most common reason a pump fails to seal or wobbles on the jar.
- Dip tube length. The tube should reach near the bottom of the jar. A tube that is too short leaves product stranded, and one that is too long can bend.
- Pump material. Plastic is lighter and cheaper to replace. Stainless and brass finishes look more solid but can show water spots or tarnish.
- Dispensing volume per press. Manufacturers often publish this in milliliters. Higher volume is useful for shared bathrooms; lower volume helps control waste in kitchens.
- Ease of cleaning. Wider openings and removable dip tubes make cleaning far easier, especially with lotions that can build up.
Specs to check
- Neck size: regular-mouth (about 70 mm) or wide-mouth (about 86 mm)
- Dip tube length relative to your jar height
- Pump head material and finish
- Stated dispensing volume per press
- Whether the lid is included or sold separately
Choosing by need
For a kitchen sink used several times a day, prioritize corrosion resistance and a sturdy spring; a stainless or rustproof pump is a sensible choice. For a decorative bathroom display, metal finishes and matching lids matter more than heavy-duty performance. For thick hand cream, look for a wide-bore dip tube and a pump labeled for lotion. For a first-time buyer who doesn’t want to match parts, a complete lid-and-pump set removes most of the guesswork.
Things to watch out for
- Do not assume “mason jar” means one universal size. Ball jars come in regular and wide mouths, and some decorative jars use other threads.
- Thick products can clog thin dip tubes. Thin your lotion slightly if the manufacturer allows, or choose a lotion-rated pump.
- Glass jars are fragile around the neck. Avoid overtightening the collar.
- Rinse the pump regularly to prevent residue buildup, which can cause sticking or slow dispensing.
- Check return or replacement policies, since pump springs can wear out over time.
FAQ
Will any pump fit a Ball jar?
No. Ball jars come in regular-mouth and wide-mouth sizes, and the pump’s collar must match the neck thread. Measure the opening before buying, and confirm the listing states which mouth size it fits.
Can I use a soap dispenser pump with lotion?
Often yes, but thick lotion can slow the pump or cause air locks. A pump labeled for lotion, with a wider dip tube, is the safer choice for creamy products.
How do I prime a mason jar soap pump?
Fill the jar, screw the pump on firmly, then press the pump head several times until liquid reaches the nozzle. If it still does not dispense, unscrew the pump and check that the dip tube is fully submerged and not kinked.
Are stainless steel pumps better than plastic?
Stainless steel resists rust and looks more substantial, which suits wet or high-use areas. Plastic is lighter and easier to replace. Neither is strictly better; the choice depends on your setting and how often you use the pump.
How do I clean a jar soap dispenser pump?
Remove the pump, rinse the head and dip tube with warm water, and let them dry fully before refilling. For stubborn residue, run warm water through the pump several times. Clean the jar too, since residue there can cause sticking.
Why does my pump keep dripping?
Dripping often happens when the spring is worn or when the pump is not sealed tightly to the jar. Tighten the collar, clean the nozzle, and if the problem continues, the pump may need replacing. Check the manufacturer’s guidance for your specific model.
Can I refill the jar with different products?
Yes, but avoid mixing products with very different viscosities, and rinse the pump between refills if the scent or color changes. Be cautious with products containing essential oils, which can degrade some plastic parts over time.
Conclusion
A good ball jar soap dispenser pump starts with the right neck size, then depends on what you will dispense and where you will use it. For standard regular-mouth Ball jars with thin soap, the regular-mouth lid is the simplest path. Wide-mouth jars and thicker contents suit the wide-mouth option or a lotion-rated set. Kitchens and wet areas benefit from the stainless or rustproof pumps, while decorative bathrooms may prefer the brass-finish set. If you want everything matched in one purchase, a complete lid-and-pump set reduces the risk of a mismatch. Measure your jar, match the neck type, and check dispensing volume and material against your daily use, and you will end up with a pump that works reliably for years.
About the author
hoopsjunkie editorial team writes reviews and buying guides for Hoops Junkie.