We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

How to Take Down an In Ground Basketball Hoop: A Step-by-Step Guide

Learn how to take down an in ground basketball hoop safely, from draining the pole and removing the backboard to pulling the anchor. Steps, tools and tips insid

Updated November 2026

Taking down an in ground basketball hoop is a manageable weekend job if you work in the right order. You will remove the backboard and rim, separate the pole from its anchor, and fill or cap the hole so the spot is safe. The whole process usually takes two to four people and a few hours, depending on how the pole was set.

Before You Start: Safety and Preparation

Hoop poles are heavy, and the backboard can be surprisingly awkward once it is off the arm. Clear the area of kids, pets and vehicles, and check that the pole is not leaning toward a fence, power line or window. Read the manufacturer’s manual if you still have it, since some models use a different locking pin or base design.

Shopping for one? See our guide: 6 Best Spalding Basketball Hoop In-Ground Options Compared (2026).

Gather the tools before you touch anything:

  • Socket and wrench set, plus an Allen key if your model uses one
  • Pry bar and rubber mallet
  • Shovel, posthole digger or a small excavating tool
  • Work gloves and eye protection
  • A helper, and a ladder if your rim is high
  • Concrete patch or gravel, if you plan to fill the hole

Step-by-Step: Removing the Backboard and Rim

Start at the top. Lower the rim and backboard assembly before you attempt to loosen the pole, since the height and weight make the rest of the job harder if you skip this step.

  1. Remove the net, then unbolt the rim from the backboard.
  2. Have a helper support the backboard while you unscrew the bolts that attach it to the arm or the pole’s top bracket.
  3. Lower the backboard to the ground on a blanket or cardboard to protect the glass or acrylic.
  4. If the pole has a height-adjustment mechanism, slide or crank it to its lowest setting before the next step.

Removing the Pole from the Anchor

Most in-ground poles are set in a steel anchor or sleeve buried in concrete. The pole itself usually slides out of the sleeve once the locking hardware is released. Look for a locking pin, a set screw or a bolt through the sleeve, and remove it first.

  1. Locate and remove the locking hardware at the sleeve or base.
  2. Use a rubber mallet to tap the pole gently upward. Work around the pole rather than hitting one side hard, which can bend it.
  3. If the pole is stuck, a pry bar placed against the base plate can help. Stop if you see the pole bending.
  4. Lift the pole straight up with two people, keeping your back straight and your hands clear of pinch points.

When the Anchor Is Set in Concrete

If the pole is cemented directly into the ground and will not slide out, you will need to break away the concrete around the base. Dig down a few inches around the sleeve, then use a sledgehammer or jackhammer carefully. Many owners find it easier to leave the concrete footing in place and cover it with soil rather than destroy it entirely.

Dealing with the Hole and Anchor Sleeve

An open sleeve is a trip hazard and can collect water. Once the pole is out, decide whether to remove the sleeve or leave it in place. Removing the sleeve usually means digging around it until it can be pulled free, which can take considerable effort in clay soil.

If you are filling the hole, compact the backfill in layers of about four to six inches, watering each layer lightly before tamping. Finish with topsoil and sod, or a patch of concrete, so the surface sits level with the lawn or driveway. For a driveway, a fast-setting concrete patch mix works well for filling the void left by the anchor.

  • Rubber mallet: Lets you tap the pole loose without denting the steel or damaging the locking hardware. View on Amazon
  • Fast-setting concrete patch: Useful for finishing a driveway surface after the anchor is removed. View on Amazon
  • Heavy-duty work gloves: Protect your hands from steel edges and grit during the pole removal. View on Amazon

Common Mistakes to Avoid

  • Pulling the pole out without first releasing the locking pin, which can bend the sleeve or the pole.
  • Working alone on a pole that is heavier than it looks.
  • Leaving the hole open, which creates a hazard for children and can collect rainwater.
  • Filling the hole with loose soil only, which settles and leaves a dip over time.
  • Skipping the backboard step and trying to wrestle the full assembly at once.

FAQ

Can I take down an in ground hoop by myself?

It is possible for a lighter portable-style pole, but an in-ground pole and backboard are heavy and awkward. Having at least one helper makes the job much safer.

Do I have to remove the concrete footing?

No. Many people leave the footing in place and cover it with soil or a patch. Removing it is only necessary if you need the ground completely clear.

How long does the removal take?

Most removals take a few hours for two people, though a stubborn concrete anchor can add considerably more time. Consult a professional if you are unsure about digging near utility lines.

Conclusion

Taking down an in ground hoop comes down to working top to bottom, releasing the locking hardware before forcing the pole, and finishing the hole properly. With two people and the right tools, the job is straightforward. Check local utility markings before you dig, and call a professional if the anchor is deeply set or the ground is unstable.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our basketball gear guides, checking product details against manufacturer specifications and owner feedback.

About the author

Audrey Hayes
Audrey Hayes

Audrey Hayes writes reviews and buying guides for Hoops Junkie.